Jacket Inherent APC 2
€262.06
€220.22 net
Available, dispatch within 1-4 working days
Product information "Jacket Inherent APC 2"
The Inherent APC 2 jacket from Blaklader is built for electricians and tradespeople who need dependable protection against arc flash hazards. It is entirely metal-free, using plastic snap fasteners and zippers instead, making it suitable for work where conductive components would otherwise pose a risk.
The outer fabric, a blend of modacrylic, cotton, FR polyamide and aramid, is inherently flame-resistant, meaning the protective properties are built into the fibres themselves rather than applied as a treatment that can wash out. Day to day, the light inner lining gives the jacket a soft, supple feel against the skin, while the ripstop weave at roughly 260 g/m² keeps it tough enough for demanding site work. A water- and dirt-repellent surface finish helps the jacket stay cleaner and ready for use even under rough conditions.
The jacket is certified to EN 61482-2 at the higher APC 2 protection class, providing effective protection against the thermal effects of an electric arc flash. It also meets EN ISO 11611 for protection during welding work, EN ISO 11612 against heat and flame, and EN 13034 for limited protection against liquid chemicals. The antistatic properties under EN 1149-5 further reduce the risk of electrostatic charge build-up in suitable working environments.
Practical features such as the concealed zip chest pocket with D-ring, the front pockets with flaps, and the loops for a microphone or gas detector make this jacket a well thought-out choice for electricians, industrial technicians and anyone working on sites or in facilities with an elevated arc flash risk. Heat-applied reflective details also improve visibility in low-light conditions.
Product details
- Material: 44% Modacryl, 30% Baumwolle, 20% FR Polyamid, 5% Aramid, 1% antistatisch, Ripstop, flammhemmend, antistatisch, 260 g/m², Flammschutz, Metallfrei, Inhärent 1512
- Haupteigenschaften: Handwerker, Elektriker, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2, Oeko-Tex std 100
- Zertifizierung: Oeko-Tex std 100, SE 23-302, RISE, EN 1149-5, Max. 50 Waschgänge, EN ISO 11611, Klasse 1 A1+A2, Max. 50 Waschgänge, EN 13034 PB [6], Max. 20 Waschgänge, EN 61482-2, APC 2, Max. 50 Waschgänge, ATPV - 26 cal/cm², ELIM - 23 cal/cm², Max. 50 Waschgänge, EN ISO 11612 A1, A2, B1, C1, E2, F1
- Abschluss: Verlängerter Rücken, Verstellbarer Bund mit Druckknöpfen, Verstellbare Ärmelbündchen mit Druckknöpfen
- Details: Stehkragen, Besonders hoher Kragen am Rücken, Kunststoff-Druckknöpfe, Schlaufen an beiden Seiten der Brust für Gasdetektor / Sauerstoffmessgerät / Mikrofon, Außenliegende Zertifizierungsetiketten
- Verschluss: Verdeckter, verstärkter Reißverschluss aus Kunststoff
- Pflege: 60° C, Nicht bleichen, Nicht chemisch reinigen, Nicht bügeln, Wäschetrockner - niedrig
- Futter: gefüttert, Leicht gefüttert
- Taschen: Fronttaschen mit Patte und Druckknopf, Brusttasche mit Reißverschluss und D-Ring
- Funktion: Metallfrei, Wasser- und schmutzabweisende Oberfläche
- Produktart: Jacken
- Jackenart: Industrie Jacke
- Reflexdetails: Reflektierendes Band an ausgewählten Stellen für bessere Sichtbarkeit
- Besonderheiten: Robuster, versteckter Ein-Weg-Reißverschluss aus Kunststoff, PFAS-frei, Inhärent flammhemmend, Verstellbare Ärmelbündchen, Lichtbogenschutzklasse APC 2, Verlängerter Rücken
| Berufsgruppe: | Elektrotechnik, Schweißer & Metallverarbeitung |
|---|---|
| Schutznormen: | EN 1149 – Elektrostatische Eigenschaften, EN 13034 – Chemikalienschutz Typ 6, EN 61482 – Schutz gegen Störlichtbogen, EN ISO 11611 – Schutzkleidung für Schweißen, EN ISO 11612 – Schutzkleidung gegen Hitze und Flammen |
All information on this item is compiled to the best of our knowledge. For safety-relevant properties (e.g. protection classes, standards), the manufacturer's data sheet is authoritative – please check it before purchase.
Product and manufacturer details
- Manufacturer
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com
www.blaklader.de - Responsible person in the EU
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com - Country of origin
- MM
- Customs tariff number
- 6211331000
Passendes Zubehör
Blaklader Inherent bib overalls: flame-resistant to EN ISO 11612, EN 61482-2 and EN ISO 11611, built metal-free for electricians and tradespeople.
Blaklader Inherent APC 2 bib overalls: flame-resistant, antistatic and metal-free, certified to EN ISO 11611/11612 and EN 61482-2.
Blaklader Inherent APC 2 bib overalls: inherently flame-resistant, EN ISO 11612, arc protection APC 2, EN ISO 20471 class 1. Built for electricians and tradespe
Blaklader Inherent Steel bib overalls: flame-resistant, antistatic, certified to EN ISO 11612 and EN ISO 11611 – built for metalwork and welding.
Multi-hazard flame-retardant work trousers for electricians and welders: EN ISO 11611, EN ISO 11612, EN 61482-2, antistatic to EN 1149-5.
Flame-resistant work trousers by Blaklader with multi-standard certification (EN ISO 11612, EN ISO 11611 and more) for welders, electricians and industry.
Blaklader flame-retardant bib overalls certified to EN ISO 11611, EN ISO 11612 and EN 13034 – built for welders and electricians who need reliable protection.
Multi-norm flame-resistant bib overall for welders, electricians and mechanics – certified to EN ISO 11612, EN ISO 11611, IEC 61482-2 and more.
Heat-resistant split leather work glove for welders and heavy-duty tasks, Aramid-stitched, extended cuff, certified to EN 388 and EN 407.
NITRAS SAFE welding glove, split leather, 35 cm length, fully lined, heat-resistant to 100°C – tough and reliable grip.
NITRAS SAFE PRO welding glove in split leather, 35 cm long, with Kevlar stitching and protection against contact heat up to 100 °C.
NITRAS SAFE PRO welding glove in split leather, 35 cm long, with Kevlar stitching and heat resistance up to 100 °C for demanding welding work.