Flame Retardant Jacket
€144.03
€121.03 net
Available, dispatch within 1-4 working days
Product information "Flame Retardant Jacket"
This flame-retardant jacket from Blaklader is built for anyone working around heat, open flames or electrical hazards on an industrial site - welders, electricians and tradespeople in environments with elevated risk. A concealed, reinforced metal zipper, several practically placed pockets and a bellows pleat on the back mean this jacket is designed for long shifts and constant movement, not just for protection on paper.
The fabric, a twill weave made from 85% cotton, 14% polyester and 1% anti-static fibre at 350 g/m², is sturdy enough for industrial laundering yet doesn't feel heavy or stiff on the body. Pre-shaped elbows and an adjustable waist with snap buttons keep the jacket in place through repeated movement, while the oil-, dirt- and water-repellent finish cuts down on how often it needs attention during a working week. The jacket is unlined, which makes it a good fit for layering over other clothing or for warmer working conditions.
Protection here is broad-based. EN ISO 11612 covers heat and flame exposure, EN ISO 11612 EN ISO 11611 specifically addresses hazards from welding work, and the anti-static properties under EN 1149-5 help dissipate static charge before it becomes a risk. The arc rating under EN 61482-1-1, with an ATPV value of 16.0 cal/cm², indicates how much energy the fabric can withstand during an electric arc flash before breaking through - a key figure for anyone working on or near live equipment. On top of that, EN 13034 adds protection against contact with certain liquid chemicals, and reflective details improve visibility in low light.
This combination of standards makes the jacket well suited to trades facing several hazards at once - metalworking, industrial plant construction or electrical work in industrial settings, where heat, open flame, static build-up and chemical exposure can all come into play on the same job.
Product details
- Material: 85% Baumwolle, 14% Polyester, 1% antistatisch, Köper, flammhemmend, antistatisch, 350 g/m², Flammschutz, Herren, Erhältlich für Damen und Herren, Behandelt 1516
- Haupteigenschaften: Handwerker, Elektriker, Schweißer, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2, Oeko-Tex std 100
- Zertifizierung: Oeko-Tex std 100, SE 23-302, RISE, EN 1149-5, EN ISO 11611, Klasse 1 A1+A2, EN 13034 PB [6], Max. 20 Waschgänge, EN ISO 11612 A1, A2, B1, C1, E3, F1, EN 61482-2, APC 1, ELIM - 12 cal/cm², ATPV - 16 cal/cm²
- Taschen: Handytasche innen, Eingesetzte Taschen mit Patten, Brusttaschen mit verdecktem Reißverschluss, Innentasche
- Details: Balg am Rücken, Hoher Kragen mit verdecktem Reißverschluss, Außenliegende Zertifizierungsetiketten
- Abschluss: Verstellbare Ärmelbündchen mit Druckknöpfen, Verstellbarer Bund mit Druckknöpfen
- Reflexdetails: Reflektierende Details
- Verschluss: Verdeckter, verstärkter Reißverschluss aus Metall
- Pflege: 60° C, Nicht bleichen, Nicht chemisch reinigen, Nicht bügeln, Wäschetrockner - niedrig, PRO: zum Trocknen im Trommeltrockner geeignet, Industriewäsche EN ISO 15797
- Futter: Ungefüttert
- Produktart: Jacken
- Jackenart: Industrie Jacke
- Besonderheiten: Antistatische Eigenschaften, Flammhemmendes Material, PFAS-frei, Reflektierende Details, Verlängerter Rücken, Vorgeformte Ärmel
- Funktion: Wasser- und schmutzabweisende Oberfläche
- Umweltkennzeichen: OEKO-TEX® MADE IN GREEN
| Berufsgruppe: | Elektrotechnik, Schweißer & Metallverarbeitung |
|---|---|
| Zusammensetzung: | 85% Baumwolle, 14% Polyester |
| Schutznormen: | EN 1149 – Elektrostatische Eigenschaften, EN 13034 – Chemikalienschutz Typ 6, EN 61482 – Schutz gegen Störlichtbogen, EN ISO 11611 – Schutzkleidung für Schweißen, EN ISO 11612 – Schutzkleidung gegen Hitze und Flammen, EN ISO 15797 – Industriewäsche-geeignet |
All information on this item is compiled to the best of our knowledge. For safety-relevant properties (e.g. protection classes, standards), the manufacturer's data sheet is authoritative – please check it before purchase.
Product and manufacturer details
- Manufacturer
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com
www.blaklader.de - Responsible person in the EU
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com - Country of origin
- LK
- Customs tariff number
- 6203321000
Passendes Zubehör
Blaklader Inherent bib overalls: flame-resistant to EN ISO 11612, EN 61482-2 and EN ISO 11611, built metal-free for electricians and tradespeople.
Blaklader Inherent APC 2 bib overalls: flame-resistant, antistatic and metal-free, certified to EN ISO 11611/11612 and EN 61482-2.
Blaklader Inherent APC 2 bib overalls: inherently flame-resistant, EN ISO 11612, arc protection APC 2, EN ISO 20471 class 1. Built for electricians and tradespe
Blaklader Inherent Steel bib overalls: flame-resistant, antistatic, certified to EN ISO 11612 and EN ISO 11611 – built for metalwork and welding.
Multi-hazard flame-retardant work trousers for electricians and welders: EN ISO 11611, EN ISO 11612, EN 61482-2, antistatic to EN 1149-5.
Flame-resistant work trousers by Blaklader with multi-standard certification (EN ISO 11612, EN ISO 11611 and more) for welders, electricians and industry.
Blaklader flame-retardant bib overalls certified to EN ISO 11611, EN ISO 11612 and EN 13034 – built for welders and electricians who need reliable protection.
Multi-norm flame-resistant bib overall for welders, electricians and mechanics – certified to EN ISO 11612, EN ISO 11611, IEC 61482-2 and more.
Heat-resistant split leather work glove for welders and heavy-duty tasks, Aramid-stitched, extended cuff, certified to EN 388 and EN 407.
NITRAS SAFE welding glove, split leather, 35 cm length, fully lined, heat-resistant to 100°C – tough and reliable grip.
NITRAS SAFE PRO welding glove in split leather, 35 cm long, with Kevlar stitching and protection against contact heat up to 100 °C.
NITRAS SAFE PRO welding glove in split leather, 35 cm long, with Kevlar stitching and heat resistance up to 100 °C for demanding welding work.