Multinorm Jacket DA7525JA52 Long Form
€77.35
€65.00 net
Available, dispatch within 1-4 working days
Product information "Multinorm Jacket DA7525JA52 Long Form"
The DA7525JA52 multi-norm jacket from the Mauser product line is built for anyone working on changing job sites or road construction who needs to stay both visible and protected. With its stand-up collar, double front placket and thoughtfully arranged pockets, the jacket is clearly designed with everyday work in mind: two reinforced chest pockets with hook-and-loop closures, two side pockets with concealed press studs, and two inner pockets provide plenty of room for tools, a phone or paperwork without anything falling out.
The fabric blend of 74% cotton, 25% polyester and 1% antistatic fibres comes in at roughly 350 g/m², giving a sturdy yet wearable weight. The permanent flame-retardant and FC finish stays effective wear after wear instead of fading out over time. Knitted inserts in the upper back sleeve and at the cuffs allow freer movement, while the ergonomically shaped sleeve makes overhead or bent-over work noticeably easier.
The jacket meets EN 17353 and falls under PPE Category III, meaning it is intended for use where the risk level is elevated. Wide reflective stripes across the shoulders, back and upper sleeves add strong visibility in poor light, a real safety benefit for anyone working near traffic or during dusk and dawn hours. The printed norm pictogram patch makes the jacket's protective function easy to recognise at a glance.
That makes the DA7525JA52 a strong fit for road workers, traffic signalling crews, construction staff and anyone working outdoors in changing conditions with exposure to heat or static build-up. Available in yellow/blue across 21 sizes from 44 up to custom sizing, the jacket can be matched to almost any build.
Product details
- Material: 74 % Baumwolle, 25 % Polyester, 1 % sonstige Fasern (Antistatik), dauerhaft flammenhemmende Ausrüstung und FC-Ausrüstung, ca. 350 g/m²
- Standards: EN 17353
- PPE category: Kat. III
- Certificate number: 049/2022/0731
- Testing institute: Centexbel Belgium, Technologiepark-Zwijnaarde 70 , 9052 Zwijnaarde - Belgium, Notified body number 0493
- Country of origin: Albanien
| Berufsgruppe: | Elektrotechnik, Schweißer & Metallverarbeitung |
|---|---|
| Zusammensetzung: | 74% Baumwolle, 25% Polyester |
| Schutznormen: | EN 17353 – Warnausrüstung mittlerer Sichtbarkeit |
All information on this item is compiled to the best of our knowledge. For safety-relevant properties (e.g. protection classes, standards), the manufacturer's data sheet is authoritative – please check it before purchase.
Click the chart to enlarge. Measurements may vary slightly by model – we are happy to advise you.
Product and manufacturer details
- Manufacturer
- Wolfgang Mauser Schutzbekleidung GmbHAugust-Borsig-Str. 2 50126 Bergheim
02271 4777 0 - Responsible person in the EU
- Wolfgang Mauser Schutzbekleidung GmbHAugust-Borsig-Str. 2 50126 Bergheim
02271 4777 0 - Country of origin
- Albanien
- Customs tariff number
- 62033310
Ähnliche Artikel
DANEXJA01 flame-protection work jacket in aramid blend, antistatic to EN 1149-5, sizes 42 to SOND, blue.
Multinorm jacket 1525JA with permanent flame-retardant finish to IEC 61482, PPE category III, sizes 42/44 to 118/122.
Multinorm jacket DA2JA01P with arc flash protection to IEC 61482, two-layer construction, PPE category III, sizes 44 to 110.
DA2JA08P multi-norm jacket with reinforced sleeves to APC 2, certified to EN 17353, reflective trim – flame protection in 13 sizes.
Multi-hazard jacket APC 2 protecting against arc flash, heat, flames and chemical splashes to EN 17353, PPE Cat. III.
BGJA52 multi-norm jacket in long fit, certified to EN 17353, flame-retardant finish, full-body reflective stripes – 21 sizes from 44 to 118.
DA7525JA01P multinorm jacket with stand-up collar and reflective stripes, EN 17353, PPE cat. III, 18 sizes from 44 to 110 S.
DA7525JA08P multinorm jacket with arc flash protection to IEC 61482, PSA category III, available in 29 sizes from 44 to DA 46.
DALEJA01MR multi-norm jacket in 350 g/m² cotton with antistatic fibres, arc flash protection to IEC 61482, sizes 44 to 24 U.
Multinorm safety jacket MU1JA23 with antistatic, permanent flame-retardant finish to EN 1149 – sizes 44 to 110.
MUSAJA02 multinorm jacket with permanent flame-retardant finish and antistatic protection to EN 1149, available in 24 sizes from 40 to 118 S.
TECJAMR01 multinorm jacket with arc flash protection to IEC 61482, antistatic fabric, 320 g/m², sizes 80-118.
XAJA130 multi-norm jacket with antistatic protection to EN 1149, flame-retardant reflective stripes and 22 sizes up to SOND.
FLSJA52 multi-norm softshell jacket with arc flash protection to IEC 61482, modacrylic/cotton blend, sizes XXS to 4XL.
Multinorm weatherproof jacket 106JAGB with quilted lining, membrane and EN 343 protection against rain and wind, sizes 5XL to 4XL.
106JAOB multi-standard weather protection jacket with full lining, membrane and EN 343 protection – PPE category III, sizes 5XL to 4XL.
Multinorm weather jacket with liner and antistatic finish, tested to IEC 61482, PPE category III, sizes XS to 4XL.
Multi-standard weather protection jacket with liner, PU membrane and EN 343 rating for wet and windy conditions, sizes S to 5XL.
NOMEX® multinorm jacket with Kevlar® content, antistatic to EN 1149, with hi-vis and reflective stripes – PSA category III, 52 sizes.