Combination Trousers Inherent
€323.79
€272.09 net
Available, dispatch within 1-4 working days
Product information "Combination Trousers Inherent"
This bib overall from Blaklader is a sleeveless coverall built for tradespeople, electricians and service technicians who work in environments with thermal or electrical hazards. The knee pad pockets open from below, and the chest pockets can be detached at the bottom, making it easier to work while bending forward. Stretch panels on the back add freedom of movement for kneeling or crouching tasks.
The fabric is a blend of modacrylic, cotton, FR polyamide and aramid with an antistatic component, and it's inherently flame-resistant, meaning the protection is built into the fibre itself rather than a coating that can wear off. At 260 g/m², the ripstop fabric stays light while remaining tough enough for demanding daily use. Its water- and dirt-repellent surface cuts down on maintenance, and the fully metal-free construction, including a plastic zip, is a practical advantage for anyone working near live electrics. CORDURA, Kevlar and Protal reinforcements at the knees, ruler pocket and back pockets extend the garment's service life exactly where wear is heaviest.
The garment carries several certifications: EN ISO 11612 confirms protection against heat and flame, EN 61482-2 verifies protection against the thermal effects of an electric arc, and EN 1149-5 relates to the antistatic properties of the material. EN ISO 20471 class 1 adds visible high-visibility protection suited to roadwork and construction sites, reinforced by flame-resistant reflective tape with double stitching. A comprehensive set of pockets, including a ruler pocket, phone pocket and ID pocket, plus a tool loop on one of the chest pockets, makes this overall a practical choice for daily work on site or in technical service roles.
Product details
- Material: 44% Modacryl, 30% Baumwolle, 20% FR Polyamid, 5% Aramid, 1% antistatisch, Ripstop, flammhemmend, antistatisch, 260 g/m², Flammschutz, Kniepolstertaschen, Metallfrei, Stretch-Einsatz, Inhärent 1512 High Vis
- Haupteigenschaften: Handwerker, Handwerker, Elektriker, Service Mitarbeiter, EN 1149-5, EN ISO 20471, EN ISO 11612, EN 61482-2, Oeko-Tex std 100
- Zertifizierung: Oeko-Tex std 100, SE 23-302, RISE, EN 1149-5, EN ISO 20471, Klasse 1, Zertifizierungsgruppe W, EN ISO 11612 A1, B1, C1, F1, EN 14404-3 zusammen mit Kniepolster 4027, 4037 und 4057, EN 61482-2, APC 1, ATPV - 9,6 cal/cm², ELIM - 9,2 cal/cm²
- Taschen: Gesäßtaschen mit Balg und Patte, Beintasche mit Balg, Patte und Stifttasche, Zusatztasche, Handytasche und Ausweistasche, Vordertaschen mit Patten, Verstärkte Zollstocktasche mit Messerhalter und Stifttasche, Brusttaschen mit Balg, Patte und Druckknöpfen, eine mit einem Werkzeugband, Außenliegende Kniepolstertaschen
- Details: Abnehmbare Ausweistasche für Flammschutz-Kleidung, Schlaufen, Außenliegende Zertifizierungsetiketten
- Abschluss: Verlängerungsmöglichkeit am Beinsaum, gilt nicht für die Größen D, Einstellbare Breite des Beinsaums mit Kunststoff-Druckknöpfen
- Funktion: Stretch am Rücken, Metallfrei, Wasser- und schmutzabweisende Oberfläche
- Verschluss: Verdeckter 2-Wege-Reißverschluss aus Kunststoff
- Pflege: 60° C, Nicht bleichen, Nicht chemisch reinigen, Nicht bügeln, Wäschetrockner - niedrig
- Verstärkung: CORDURA®/Kevlar®/Protal® - verstärkt an den Knien, Verstärkte Zollstocktasche und Gesäßtaschen
- Reflexdetails: Flammhemmende Reflexstreifen mit doppelten Nähten
- Produktart: Latzhosen & Ärmellose Overalls
- Warnschutzklasse: EN ISO 20471 - Klasse 1
- Warnschutz-Zertifizierung: W (Unterteil)
- Besonderheiten: CORDURA®-verstärkte Kniepolstertaschen, PFAS-frei, Inhärent flammhemmend, Wasserabweisend
| Berufsgruppe: | Baugewerbe, Elektrotechnik, Logistik & Lager, Schweißer & Metallverarbeitung |
|---|---|
| Schutznormen: | EN 1149 – Elektrostatische Eigenschaften, EN 14404 – Knieschutz für kniende Tätigkeiten, EN 61482 – Schutz gegen Störlichtbogen, EN ISO 11612 – Schutzkleidung gegen Hitze und Flammen, EN ISO 20471 – Warnschutzkleidung |
All information on this item is compiled to the best of our knowledge. For safety-relevant properties (e.g. protection classes, standards), the manufacturer's data sheet is authoritative – please check it before purchase.
Product and manufacturer details
- Manufacturer
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com
www.blaklader.de - Responsible person in the EU
- Blåkläder Deutschland GmbH
Papiermühlenweg 74
40882 Ratingen
Deutschland
Tel. +49 2102 48 279 40
kundendienst@blaklader.com - Country of origin
- MM
- Customs tariff number
- 6211331000
Passendes Zubehör
Blaklader Half-Zip Sweatshirt with High Vis panels, 320 g/m² cotton French Terry, extended back, available for men and women.
High-vis safety jacket certified to EN ISO 20471 Class 3, with wide reflective stripes and multiple practical pockets for construction and trades work.
Blaklader high-vis T-shirt in soft cotton jersey with reflective hem, certified to EN ISO 20471 Class 1 – for visibility on site and on the road.
High vis T-shirt in 100% cotton with reflective stripes to EN ISO 20471 Class 1 – comfortable, breathable, built for site work.
Long-sleeve hi-vis polo shirt with UV protection (UPF 40+) to EN 13758-2 and hi-vis certification to EN ISO 20471, class 2/3.
High-vis long sleeve shirt with moisture-wicking mesh panels, UPF 40+ UV protection and reflective strips to EN ISO 20471.
Blaklader High Vis UV polo shirt with EN ISO 20471 Class 2 visibility, UPF 40+ UV protection and mesh panels for moisture management.
Blaklader High Vis UV polo shirt with UV protection to EN 13758-2 and hi-vis certification to EN ISO 20471 – breathable and moisture-wicking.
High-vis T-shirt with UPF 40+ UV protection and EN ISO 20471 class 3 visibility – breathable, moisture-wicking, in three hi-vis colours.
Blaklader Hi-Vis jacket certified to EN ISO 20471 Class 2 – water-repellent, pre-shaped sleeves and wide reflective stripes for roadwork and site jobs.
High-vis work jacket certified to EN ISO 20471 Class 3, lightweight and water-repellent, with an extended back – built for road and construction work.
Hi-vis knitted jacket with hood, certified to EN ISO 20471 Class 2, reinforced with softshell at the shoulders and sleeves for durability.