Multinorm Overalls XAKO130
€140.12
€117.75 net
Available, dispatch within 1-4 working days
Product information "Multinorm Overalls XAKO130"
The XAKO130 multinorm coverall from the Mauser product line is a one-piece garment designed for work environments where electrical hazards are a concern. Finished in blue and grey, with a grey yoke panel and a blue lay-down collar, it suits professionals who need a well-equipped, protective garment that combines reliable safety performance with generous storage.
The fabric is made from 54% Modacrylic and 45% cotton with a small proportion of antistatic fibres and an FC finish, at a weight of around 320 g/m². This combination results in a durable yet comfortable material that holds up to daily wear without feeling stiff or restrictive. The front closes securely via a two-way zip backed by hook-and-loop tape, and the numerous pockets are likewise secured with flaps and hook-and-loop fastenings to keep contents in place. Cuffed sleeves with a gusset and an elasticated rear waistband with buttonhole elastic allow the fit to be adjusted for comfort.
The coverall is tested to IEC 61482 and classified as PSA category III, a category reserved for protective equipment against serious or fatal hazards. This standard assesses protection against the thermal effects of an electric arc flash, relevant for work on or near live electrical installations. Flame-resistant reflective stripes on the front, back and legs add a further layer of protection while improving visibility.
With its rule pocket, leg pocket, rear pockets and side access openings, the XAKO130 is particularly well suited to electricians and service technicians who need both dependable protection and practical storage while on the job.
Product details
- Material: 54 % Modacryl, 45 % Baumwolle, 1 % sonstige Fasern (Antistatik) mit FC-Ausrüstung ca. 320g/m²
- Standards: IEC 61482
- PPE category: Kat. III
- Certificate number: V 0089/18-0087/18
- Testing institute: Sächsisches Textilforschungsinstitut e.V., Annaberger Straße 240, 09125 Chemnitz - Germany, Notified body number 0516
- Country of origin: Albanien
| Berufsgruppe: | Elektrotechnik, Schweißer & Metallverarbeitung |
|---|---|
| Zusammensetzung: | 54% Modacryl, 45% Baumwolle |
| Schutznormen: | IEC 61482 – Schutz gegen Störlichtbogen |
All information on this item is compiled to the best of our knowledge. For safety-relevant properties (e.g. protection classes, standards), the manufacturer's data sheet is authoritative – please check it before purchase.
Click the chart to enlarge. Measurements may vary slightly by model – we are happy to advise you.
Product and manufacturer details
- Manufacturer
- Wolfgang Mauser Schutzbekleidung GmbH August-Borsig-Str. 2 50126 Bergheim 02271 4777 0
- Responsible person in the EU
- Wolfgang Mauser Schutzbekleidung GmbH August-Borsig-Str. 2 50126 Bergheim 02271 4777 0
- Country of origin
- Albanien
- Customs tariff number
- 62034211